Paper
17 December 2003 Phase degradation characteristics of programmed AAPSM defects with automatic inspection tool sensitivity
Author Affiliations +
Abstract
Accurate defect characterization is becoming increasingly more important with the increased implementation of AAPSM applications. Quartz bump/divot defectivity adds a third dimension to the historical definition of photomask defects that included only size and transmission. This new dimension is phase. Past studies have suggested that significant phase degradation occurs even at smaller defect sizes. This characterization is tied closely with the defect capture capability of photomask inspection. Inspection tool sensitivity to phase defects is increasingly important for at least two reasons: the danger of catastrophic defects printing on the wafer, and the newness of these types of defects to the photomask-making community at large. This experiment utilizes two distinct forms of defect characterization -- SEM sizing and surface profilometry. Programmed defect test masks were manufactured for phase shifting properties at both 248nm and 193nm exposure wavelengths. The defects were etched at multiple depths resulting in a variety of phase angle errors. This study will examine the effects of phase degradation on smaller defects along with defect capture from automatic inspection tools.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Darren Taylor and Eric Poortinga "Phase degradation characteristics of programmed AAPSM defects with automatic inspection tool sensitivity", Proc. SPIE 5256, 23rd Annual BACUS Symposium on Photomask Technology, (17 December 2003); https://doi.org/10.1117/12.518065
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Photomasks

Quartz

Defect inspection

Etching

Manufacturing

Phase shifting

Back to Top