Integrated phase shift measurements for advanced mask etch process control

Turgut Sahin; Corey Collard; Scott A. Anderson; Alfred W. Mak; Cynthia B. Brooks; Melisa J. Buie; Philip Walsh; George Li

doi:10.1117/12.518272

17 December 2003 Integrated phase shift measurements for advanced mask etch process control

Turgut Sahin, Corey Collard, Scott A. Anderson, Alfred W. Mak, Cynthia B. Brooks, Melisa J. Buie, Philip Walsh, George Li

Author Affiliations +

Proceedings Volume 5256, 23rd Annual BACUS Symposium on Photomask Technology; (2003) https://doi.org/10.1117/12.518272
Event: Photomask Technology, 2003, Monterey, California, United States

Abstract

The phase shift effect in Alternating Phase Shift Masks (AAPSMs) and chrome-less phase shift masks is created by etching trenches directly into the quartz substrate. Since the phase shift is critically dependent on the etch depth, the quartz etch process must be tightly controlled. In the absence of an etch stop for the process, an integrated metrology solution is desirable on the mask tech tool. Traditional methods for measuring etch depth or phase shift, such as interferometry, profilometry, AFM, and SEM, are expensive, slow, and/or destructive. In addition, traditional methods cannot measure quartz etch depth without removing the resist and in some cases the chrome mask, making them unsuitable for integration into the etch process. This paper will present measurements of trench depth and phase shift on quartz phase shift mask using the n&k Analyzer 1512-RT. The n&k Analyzer measures reflectance (R) and transmittance (T) from 190-1000nm, which is analyzed according to the Forouhi-Bloomer dispersion relations to simultaneously determine n, k, film thicknesses, trench depth, and phase shift. The measurement is non-destructive and fast, typically taking 2-3 seconds per measurement point. No special test structures are required for the measurement. In addition, the n&k Analyzer can measure quartz etch depth with the chrome mask, ARC layers, and resist still intact. The n&k Analyzer measurements show good correlation with 193nm interferometer measurements, and good repeatability. The small footprint, ease of use, measurement speed, and the ability to measure quartz depth in the presence of chrome and resist make the n&k Analyzer an ideal candidate for integrated metrology applications on mask etch tools for advanced proces control (APC). The Applied Materials' Tetra II phootmask etch system has the unique capability to accommodate integrated metrology modules through the factory interface. Applications of APC with integrated phase shift measurements will be discussed.

Citation Download Citation

Turgut Sahin, Corey Collard, Scott A. Anderson, Alfred W. Mak, Cynthia B. Brooks, Melisa J. Buie, Philip Walsh, and George Li "Integrated phase shift measurements for advanced mask etch process control", Proc. SPIE 5256, 23rd Annual BACUS Symposium on Photomask Technology, (17 December 2003); https://doi.org/10.1117/12.518272

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available