Paper
3 November 2003 Generation of uniform lines with variable size using a beam shaping hybrid zoom optical system
Arnold Daniels, Glyn D. W. Lewis, Kurt Kanzler
Author Affiliations +
Abstract
A state-of-the-art laser beam shaper zoom optical system has been developed. This optical device, efficiently converts a 532 nm single-mode Gaussian intensity profile into top hat lines of variable size with peak-to-valley non-uniformities of ≤±8%. This hybrid zoom system is capable of generating line lengths ranging between 0.16 mm to 1 mm, and line widths of up to 15 μm. The lines are of square-like shape in the long axis while they remain Gaussian in the short axis. The system was designed, fabricated, and tested using a laser with a nominal input Gaussian beam waist of 2.25 mm at the 1/e2 intensity points, and a nominal M2 of less than 1.1. Techniques associated with the system alignment during the optical assembly and system integration are discussed. The optical design and test results of the diffractive-optical system are also presented.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Arnold Daniels, Glyn D. W. Lewis, and Kurt Kanzler "Generation of uniform lines with variable size using a beam shaping hybrid zoom optical system", Proc. SPIE 5175, Laser Beam Shaping IV, (3 November 2003); https://doi.org/10.1117/12.508077
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zoom lenses

Relays

Beam shaping

Lens design

Homogenization

Optical fabrication

Monochromatic aberrations

RELATED CONTENT

Three-mirror optical system designs using y-y-bar diagram
Proceedings of SPIE (October 20 2023)
Anamorphic prime and zoom lenses
Proceedings of SPIE (September 09 2019)
Zoom lens design
Proceedings of SPIE (December 14 2001)
Zoom lens design
Proceedings of SPIE (October 14 2005)

Back to Top