Alignment of the grating wheel mechanism for a ground-based cryogenic near-infrared astronomy instrument

Sharon M. Gutkowski; Raymond G. Ohl; Jason E. Hylan; John G. Hagopian; Stephen E. Kraft; J. Eric Mentzell; Joseph A. Connelly; Joseph P. Schepis; Leroy M. Sparr; Matthew A. Greenhouse; John W. MacKenty

doi:10.1117/12.503506

15 October 2003 Alignment of the grating wheel mechanism for a ground-based cryogenic near-infrared astronomy instrument

Sharon M. Gutkowski, Raymond G. Ohl, Jason E. Hylan, John G. Hagopian, Stephen E. Kraft, J. Eric Mentzell, Joseph A. Connelly, Joseph P. Schepis, Leroy M. Sparr, Matthew A. Greenhouse, John W. MacKenty

Author Affiliations +

Proceedings Volume 5172, Cryogenic Optical Systems and Instruments X; (2003) https://doi.org/10.1117/12.503506
Event: Optical Science and Technology, SPIE's 48th Annual Meeting, 2003, San Diego, California, United States

Abstract

We describe the population, optomechanical alignment, and alignment verification of near-infrared gratings on the grating wheel mechanism (GWM) for the Infrared Multi-Object Spectrometer (IRMOS). IRMOS is a cryogenic (80 K), principle investigator-class instrument for the 2.1 m and Mayall 3.8 m telescopes at Kitt Peak National Observatory, and a MEMS spectrometer concept demonstrator for the James Webb Space Telescope. The GWM consists of 13 planar diffraction gratings and one flat imaging mirror (58x57 mm), each mounted at a unique compound angle on a 32 cm diameter gear. The mechanism is predominantly made of Al 6061. The grating substrates are stress relieved for enhanced cryogenic performance. The optical surfaces are replicated from off-the-shelf masters. The imaging mirror is diamond turned. The GWM spans a projected diameter of ~48 cm when assembled, utilizes several flexure designs to accommodate potential thermal gradients, and is controlled using custom software with an off-the-shelf controller. Under ambient conditions, each grating is aligned in six degrees of freedom relative to a coordinate system that is referenced to an optical alignment cube mounted at the center of the gear. The local tip/tilt (R_x/R_y) orientation of a given grating is measured using the zero-order return from an autocollimating theodolite. The other degrees of freedom are measured using a two-axis cathetometer and rotary table. Each grating's mount includes a one-piece shim located between the optic and the gear. The shim is machined to fine align each grating. We verify ambient alignment by comparing grating diffractive properties to model predictions.

Citation Download Citation

Sharon M. Gutkowski, Raymond G. Ohl, Jason E. Hylan, John G. Hagopian, Stephen E. Kraft, J. Eric Mentzell, Joseph A. Connelly, Joseph P. Schepis, Leroy M. Sparr, Matthew A. Greenhouse, and John W. MacKenty "Alignment of the grating wheel mechanism for a ground-based cryogenic near-infrared astronomy instrument", Proc. SPIE 5172, Cryogenic Optical Systems and Instruments X, (15 October 2003); https://doi.org/10.1117/12.503506

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available