Paper
1 April 2003 Study of interaction procedure of fine water mist with hot objects
Author Affiliations +
Abstract
Fine water mist can be used to restrain thermal hazard in some special situations, such as information center and telephone exchange center. A set of experiment was conducted to study the interaction of fine water mist with hot objects of different shape. An adjuster was designed to control the surface temperature of them avoiding over-heated. These objects were chosen to simulate the shape of cable and box used in electric equipment. Change of thermal field around these hot objects was measured before and after exertion of fine water mist. The flow procedure of fine water mist on the objects was displayed by an optical system. Vaporization height of fine water mist above different hot object was also measured. The restrain efficiency of fine water mist with different flux but same droplet size is compared. The experiment results serve as reference to engineering application of fine water mist to restrain thermal hazard of electric apparatus.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiang Xu and Cong Jin "Study of interaction procedure of fine water mist with hot objects", Proc. SPIE 5073, Thermosense XXV, (1 April 2003); https://doi.org/10.1117/12.485916
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Data acquisition

Lithium

Safety

Atmospheric modeling

Ceramics

Laser Doppler velocimetry

RELATED CONTENT

Research on the Influence of slope and heat release rate...
Proceedings of SPIE (October 14 2021)
Lithium batteries temperature and strain fiber monitoring
Proceedings of SPIE (September 28 2015)
Near-IR meteorological lidar MEL-01
Proceedings of SPIE (September 05 2000)

Back to Top