Paper
15 January 2003 Improved resolution of thick film resist (effect of pre-bake condition)
Author Affiliations +
Proceedings Volume 4979, Micromachining and Microfabrication Process Technology VIII; (2003) https://doi.org/10.1117/12.472761
Event: Micromachining and Microfabrication, 2003, San Jose, CA, United States
Abstract
The effect of pre-baking conditions on the resolution and aspect ratio of thick-film resists is examined in order to improve resist processing performance. Resist samples are pre-baked at various temperatures and for various baking times, and a range of resist properties are examined. It is found that the pre-baking conditions affording the best resist pattern profile and development contrast are 125 °C for 7 min. The mechanisms responsible for the observed variations in pattern profile are studied by comparing and simulating the development activation energy, the change in the amount of solvent and photo active compound (PAC) during pre-baking, the residual solvent amount in the resist, and the transmission after pre-baking. The results indicate that there are two factors responsible for retarding the pattern formation process and causing degradation of pattern profile and resolution. One mechanism is N2 bubbling during development, which is caused by N2 trapped in residual solvent during exposure. The other mechanism is thermal decomposition of the PAC during baking, which weakens the retardation of development unexposed resist.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yoshihisa Sensu and Atsushi Sekiguchi "Improved resolution of thick film resist (effect of pre-bake condition)", Proc. SPIE 4979, Micromachining and Microfabrication Process Technology VIII, (15 January 2003); https://doi.org/10.1117/12.472761
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Picture Archiving and Communication System

Optical lithography

Photoresist processing

Scanning electron microscopy

Temperature metrology

Systems modeling

Lithography

Back to Top