Paper
13 November 2002 Fabrication of microstructure using electrochemical etching in hydrofluoric acid
Jung-Yan Huang, Hung-Yin Tsai, Chih-Hung Wu, Chia-Ching Su, Chin-Hon Fan
Author Affiliations +
Proceedings Volume 4936, Nano- and Microtechnology: Materials, Processes, Packaging, and Systems; (2002) https://doi.org/10.1117/12.469434
Event: SPIE's International Symposium on Smart Materials, Nano-, and Micro- Smart Systems, 2002, Melbourne, Australia
Abstract
The fabrication of microstructure with high aspect ratio is one of the most important issues in MEMS technology. This paper presents a technology of micromachining using electrochemical etching in hydrofluoric acid. Pores with high aspect ratio (>10:1) and smooth surface have been produced in the current study. The dimensions and shapes of etching pores can be varied over a wide range by adjusting electrochemical etching parameters. HF concentration is one of the most important parameter, since it influences not only etching rate but also diameter and the inner surface roughness of pores. The etching rate increases with HF concentration and so does the diameter of pores. Therefore an optimal HF concentration can be obtained. Besides, the inner surface roughness (Ra about 12nm) in 6.1% HF concentration is obtained. The roughness of different pores surface from electrochemical etching and inductively coupled plasma (ICP) etching is also compared. It is observed that pores fabricated by electrochemical etching has relatively smoother surface.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jung-Yan Huang, Hung-Yin Tsai, Chih-Hung Wu, Chia-Ching Su, and Chin-Hon Fan "Fabrication of microstructure using electrochemical etching in hydrofluoric acid", Proc. SPIE 4936, Nano- and Microtechnology: Materials, Processes, Packaging, and Systems, (13 November 2002); https://doi.org/10.1117/12.469434
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Electrochemical etching

Surface roughness

Silicon

Plasma etching

Resistance

Wet etching

Back to Top