Paper
11 July 2002 Frequency dependence of PMN-PT ceramics under electrical bias
Author Affiliations +
Abstract
It is a well-known fact that electrostrictive materials, such as lead magnesium niobate-lead titanate (PMN-PT) ceramics, exhibit significant frequency dispersion in their small signal dielectric constant below their dielectric maximum temperature Tm. The frequency dispersion in several PMN-PT compositions will be examined in this study using two independent measurement methods: dc biased resonance and large signal quasistatic measurements conducted on NUWC Division Newport's SDECS. From these measurements, the coupling factor, piezoelectric constant and Young's modulus are compared as a function of the applied bias and frequency. Both the DC biased and SDECS measurements were performed on the same 3:1 aspect ratio samples. Finite element calculations will show that the error in determining the Young's modulus and piezoelectric constant from resonance using these samples is less than 5 percent. It will be shown that when frequency dispersion exists it remains even with the application of dc bias, and that the degree of deviation between these quantities increases the further below Tm the temperature drops. It will also be shown that, like the dielectric constant, the coupling factor, piezoelectric constant and Young's modulus in PMN-PT ceramics above Tm are non-dispersive.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Harold C. Robinson and Elizabeth A. McLaughlin "Frequency dependence of PMN-PT ceramics under electrical bias", Proc. SPIE 4699, Smart Structures and Materials 2002: Active Materials: Behavior and Mechanics, (11 July 2002); https://doi.org/10.1117/12.475009
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Dielectrics

Temperature metrology

Transducers

Error analysis

Projection systems

Actuators

Back to Top