Novel polychromatic measurement technique for determining the dissolution rate of very thin resist films

Stewart A. Robertson; Doris Kang; Steven A. Scheer; Colin J. Brodsky

doi:10.1117/12.473460

16 July 2002 Novel polychromatic measurement technique for determining the dissolution rate of very thin resist films

Stewart A. Robertson, Doris Kang, Steven A. Scheer, Colin J. Brodsky

Proceedings Volume 4689, Metrology, Inspection, and Process Control for Microlithography XVI; (2002) https://doi.org/10.1117/12.473460
Event: SPIE's 27th Annual International Symposium on Microlithography, 2002, Santa Clara, California, United States

Abstract

Conventional optical development rate measurement techniques are generally unsuitable for monitoring the dissolution very tin resist films. Monochromatic systems have inadequate thickness resolution to capture the details of surface and standing wave effects, while traditional polychromatic techniques are generally unable to measure thicknesses below 250 nm. The failure of polychromatic analysis methods occurs when there is an absence of turning points int eh relative reflection spectrum. The exact thickness at which this happens is a function of the wavelength range utilized and the resist material's optical characteristics. A novel measurement method is introduced which allows a polychromatic DRM system to measure any resist thickness. Rather than placing the film under analysis directly on a reflecting substrate, it is spun on a wafer that has a relatively thick transparent film on its surface. The transparent film induces turning points in the relative reflection spectrum. The position of these turning points is modified by the presence of thin resist films in a predictable way, allowing accurate measurement of the resist film, providing the optical and thickness details of the intermediate film are known. Experimental results are presented demonstrating the capability of the technique to measure the dissolution rates of films with initial thickness ranging from 56 nm to 4400 nm. The ability of the method to resolve fine dissolution detail, such as standing waves and surface effects is also presented.

Citation Download Citation

Stewart A. Robertson, Doris Kang, Steven A. Scheer, and Colin J. Brodsky "Novel polychromatic measurement technique for determining the dissolution rate of very thin resist films", Proc. SPIE 4689, Metrology, Inspection, and Process Control for Microlithography XVI, (16 July 2002); https://doi.org/10.1117/12.473460

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available