Paper
9 July 2001 Automobile applications of optical thin films modified by nanotechnology
Author Affiliations +
Abstract
Photocatalytic properties of obliquely deposited TiO2 thin films with various shaped columns were investigated. The columnar films such as zigzag, cylinder and helix were prepared by dynamic oblique deposition (DOD) method. It was found that the optimum morphology for surface photocatalytic reaction has been obtained at the deposition angle (alpha) equals 70 degrees, where the photocatalytic activity is 2.5 times larger than that at (alpha) equals 0 degrees. In addition, effective surface area was estimated by Monte Carlo simulation and quantitative agreement was obtained between theoretical and experimental results. It was concluded that the enhanced surface photocatalytic properties of obliquely deposited TiO2 films can be explained in terms of effective changes in surface area originated from morphology modified by thin film nanotechnology.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yasunori Taga and Motofumi Suzuki "Automobile applications of optical thin films modified by nanotechnology", Proc. SPIE 4467, Complex Mediums II: Beyond Linear Isotropic Dielectrics, (9 July 2001); https://doi.org/10.1117/12.432922
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thin films

Absorption

Nanotechnology

Photocatalysis

Ultraviolet radiation

Monte Carlo methods

Scanning electron microscopy

Back to Top