Paper
27 February 2002 High-performance flexible polymer light-emitting diodes fabricated via a low-temperature plastic laminated process
Author Affiliations +
Abstract
In this manuscript, we report on the successful fabrication of high performance polymer light emitting diodes (PLEDs) using a low temperature, plastic lamination process. Blue- and red-emitting PLEDs were fabricated by laminating different luminescent polymers and organic compounds together to form the active media. This unique approach eliminates the issue of organic solvent compatibility with the organic layers for fabricating multi-layer PLEDs. In addition, a template activated surface process (TAS) has been successfully applied to generate an optimum interface for the low temperature lamination process. The atomic force microscopy analysis reveals a distinct difference in the surfaces created by the TAS and the spin-coating process. This observation coupled with the device data confirms the importance of the activated interface in the lamination process.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tzung-Fang Guo, Shun-Chi Chang, Seungmoon Pyo, and Yang Yang "High-performance flexible polymer light-emitting diodes fabricated via a low-temperature plastic laminated process", Proc. SPIE 4464, Organic Light-Emitting Materials and Devices V, (27 February 2002); https://doi.org/10.1117/12.457482
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Organic light emitting diodes

Polymers

Interfaces

Atomic force microscopy

Electroluminescence

Adhesives

Electrodes

Back to Top