Paper
14 September 2001 Optimal positions for SB assignment and the specification of SB width variation
Author Affiliations +
Abstract
High NA illumination system and off-axis illumination (OAI) have been shown as two of the most practical resolution enhancement techniques (RET) available for micro-lithography. However, these two illumination approaches may reduce the DOF of iso-patterns. To overcome this problem, scattering bar (SB) assignment has been wildly used. In this paper, the discussions are focused on SB variables of iso-features. The most important variable of SB usage is where is the suitable assignment position. A simply efficient rule has been found to easily catch the optimal position of SB assignment. For OAI illumination, the optimal SB position is exactly the same with the defocus side-lobe position of iso-line. The effect of the secondary pair of SB is also discussed in this paper, and it is found that if the secondary SB pair was not at the optimal position, the process window would be reduced. Another major topic in this paper is the specification of SB width. Here we design a test pattern to target the specification of SB width. The experimental results might give us a clear specification of SB width.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chih-Ming Lai, Ru-Gun Liu, Tsai-Sheng Gau, Fu-Jye Liang, Shuo-Yen Chou, and Lin-Hung Shiu "Optimal positions for SB assignment and the specification of SB width variation", Proc. SPIE 4346, Optical Microlithography XIV, (14 September 2001); https://doi.org/10.1117/12.435683
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Antimony

Scattering

Critical dimension metrology

Double sideband modulation

Resolution enhancement technologies

Modulation

Superposition

Back to Top