Paper
14 September 2001 Multiple-focus exposure in strong phase-shift lithography: improvement of CD-focus characteristics and CD controllability
Author Affiliations +
Abstract
To improve the CD controllability of isolated lines, we have developed a new method using multiple-focus exposure in alternating phase-shift lithography. In this paper, the imaging performance such as DOF, exposure latitude, mask linearity, and CD controllability is discussed through both experiments and simulation. Multiple-focus exposure experiments were performed using a KrF scanner by giving a tilt offset between the image focal plane and the wafer leveling plane. For the conventional alternating phase-shift method, the CD-focus curve showed a strong concave shape and thus the DOF was rather small. By applying multiple-focus exposure, the shape of the CD-focus curve changed from concave to flat, and therefore the DOF was much improved. We have also found that the CD controllability considering focus errors can be improved by our method.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masashi Fujimoto and Tadao Yasuzato "Multiple-focus exposure in strong phase-shift lithography: improvement of CD-focus characteristics and CD controllability", Proc. SPIE 4346, Optical Microlithography XIV, (14 September 2001); https://doi.org/10.1117/12.435768
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Critical dimension metrology

Lithography

Scanners

Semiconducting wafers

Monochromatic aberrations

Electroluminescence

Back to Top