Paper
16 April 2001 Beam-quality measurements on solid state dye lasers using nonconfocal unstable resonators
Jeffrey A. Russell, Dennis P. Pacheco, Henry R. Aldag, S. M. Dolotov, M. F. Koldunov, Ya. V. Kravchenko, Alexander A. Manenkov, A. V. Reznichenko, G. P. Roskova
Author Affiliations +
Abstract
This paper reports on a systematic study ofthe beam quality ofsolid-state dye lasers for different resonator designs. The resonators investigated include: multimode stable, hard-edge unstable, and unstable with a graded-reflectivity mirror (GRM) output coupler. The purpose ofthe work was to investigate the conditions under which good beam quality can be achieved, and to examine the possible trade-off between beam quality and energy extraction efficiency. Beam quality was quantified through conventional M2 measurements. A hard-edge unstable resonator of magnification ?2.5 produced a beam ofM2 ?11 - 12 at a PRF of 2Hz and a pump flux of 5 MW/cm2. The value increased to ? 18 — 19 at a pump flux of2O MW/cm2. This can be compared with an M2 of ? 140 - 150 with the multimode stable resonator. Preliminary measurements with the GRM resulted in M2 values of ? 5 to 6 at 5 MW/cm2.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jeffrey A. Russell, Dennis P. Pacheco, Henry R. Aldag, S. M. Dolotov, M. F. Koldunov, Ya. V. Kravchenko, Alexander A. Manenkov, A. V. Reznichenko, and G. P. Roskova "Beam-quality measurements on solid state dye lasers using nonconfocal unstable resonators", Proc. SPIE 4267, Solid State Lasers X, (16 April 2001); https://doi.org/10.1117/12.424615
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resonators

Mirrors

Dye lasers

Output couplers

Solid state lasers

Diagnostics

Glasses

Back to Top