Paper
9 October 2000 Single-ridge waveguide electroabsorption-modulated DFB laser for 2.5-Gb/s transmission
Guoli Liu, Wei Wang, Baijun Zhang, Weixi Chen, Fan Zhou, Jingyuan Zhang, Xiaojie Wang, Hongliang Zhu
Author Affiliations +
Proceedings Volume 4225, Optical Interconnects for Telecommunication and Data Communications; (2000) https://doi.org/10.1117/12.402687
Event: Optics and Optoelectronic Inspection and Control: Techniques, Applications, and Instruments, 2000, Beijing, China
Abstract
In this paper we proposed a single ridge waveguide electroabsorption modulated distributed feedback laser (EML) for long-haul high-speed optical fiber communication system. This EML was successfully fabricated by two step metal organic vapor phase epitaxy (MOVPE) including selective area growth (SAG) and helium partially implantation. No obvious changes of the threshold current (< 0.2 mA), extinction ratio (< 0.1 dB), output power (< 0.2 dBm) and isolation resistance were achieved in the preliminary aging test. With 2.5 Gb/s NRZ modulation, no power penalty was observed after the optical signal was transmitted through 280 Km normal single mode fiber.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guoli Liu, Wei Wang, Baijun Zhang, Weixi Chen, Fan Zhou, Jingyuan Zhang, Xiaojie Wang, and Hongliang Zhu "Single-ridge waveguide electroabsorption-modulated DFB laser for 2.5-Gb/s transmission", Proc. SPIE 4225, Optical Interconnects for Telecommunication and Data Communications, (9 October 2000); https://doi.org/10.1117/12.402687
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Modulation

Etching

Modulators

Waveguide lasers

Capacitance

Fiber lasers

Back to Top