Paper
25 August 2000 Packaging for a rotational accelerometer: Is a standard plastic SOIC an industrial solution?
Valter Motta, Giovanni Frezza, Mariapia Riva, Kritivasan Sivakumar
Author Affiliations +
Proceedings Volume 4174, Micromachining and Microfabrication Process Technology VI; (2000) https://doi.org/10.1117/12.396457
Event: Micromachining and Microfabrication, 2000, Santa Clara, CA, United States
Abstract
On the contrary of microelectronics where standard packages like e.g. DIP, QFP, BGA, SOIC dominate, microsensor packaging seems to be characterized by custom and application-specific packages. Moreover, in microsensor applications packaging is typically a relevant cost component of the whole system. In this scenario, the main question to solve for a high volume and no product specific company mission is the following: how to design versatile, reliable, low-cost packages for microsensor. In this article the assembly solutions for a low-cost mass production of a rotational accelerometer sensor are shown. From the packaging design point of view, the stress minimization has been the main guideline for any assembly process and material characterization choice. The process and material issues, including numerical simulations, optimization by design and experiment, are discussed in detail. Breakthrough in this project were the wafer to wafer bonding as well as the die singulation, the die to die interconnection and the thermomechanical stress minimization.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Valter Motta, Giovanni Frezza, Mariapia Riva, and Kritivasan Sivakumar "Packaging for a rotational accelerometer: Is a standard plastic SOIC an industrial solution?", Proc. SPIE 4174, Micromachining and Microfabrication Process Technology VI, (25 August 2000); https://doi.org/10.1117/12.396457
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Packaging

Microsensors

Materials processing

Wafer bonding

Material characterization

Microelectronics

Numerical simulations

RELATED CONTENT

Packaging of MEMS devices
Proceedings of SPIE (September 15 1995)
Wafer lever packaging for gyroscope by Au/Si eutectic bonding
Proceedings of SPIE (September 10 2002)
Future trends in electronic packaging
Proceedings of SPIE (March 31 2006)

Back to Top