Paper
29 November 2000 Accelerated aging of tunable thermo-optic polymer planar waveguide devices made of fluorinated acrylates
Constantina Poga, MacRae Maxfield, Lawrence W. Shacklette, Robert Blomquist, George K. Boudoughian
Author Affiliations +
Abstract
Planar wave guide device components, made from photocurable fluoroacrylates, demonstrated stability under conditions that exceed those needed to operate planar polymer thermo- optic switches. Fluoroacrylate polymers exhibited negligible decomposition at 200 degree(s)C. Insertion loss and polarization-dependent loss showed no increase at temperatures up to 257 degree(s)C. The reflected spectrum of a Bragg grating showed no monotonic change in (lambda) B, width, or strength in 105 days at 125 degree(s)C. Humidity changes from 0 to 90%RH caused a reversible blue shift in (lambda) B of only 0.00004. Light flux of 130mW exhibited no impact on n, (delta) n, or IL. Heaters showed no degradation at 85 degree(s)C/85%RH. Bonding to substrate, heaters, and pigtails remained intact throughout the testing.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Constantina Poga, MacRae Maxfield, Lawrence W. Shacklette, Robert Blomquist, and George K. Boudoughian "Accelerated aging of tunable thermo-optic polymer planar waveguide devices made of fluorinated acrylates", Proc. SPIE 4106, Linear, Nonlinear, and Power-Limiting Organics, (29 November 2000); https://doi.org/10.1117/12.408495
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Waveguides

Polymer multimode waveguides

Fiber Bragg gratings

Refractive index

Switches

Resistance

Back to Top