Paper
30 March 2000 Nondestructive method of high-intensity discharge lamp temperature measurement
Jagannathan Ravi, Robert P. Madding
Author Affiliations +
Abstract
A nondestructive method of temperature measurement of arc tubes in high intensity discharge lamps has been developed using through the glass thermal imaging. This obviates the need to break the lamp outer jackets in order to gain access to the arc tube surface. A narrow band filter centered at 3.9 micrometers is used to image the lamp. Since the spectral radiance properties of the materials arc wavelength dependent, the filter enables a more accurate measurement compared to the wideband imaging routinely employed (3 - 5 micrometers ). The path radiance equation was derived for the arc tube and bulb configuration. The radiance due to the arc tube alone is extracted after accounting for the glass contributions to the path equation. For this purpose, the temperature of the glass bulb is determined using a long wave filter (8 - 12 micrometers ). System calibration curves are used to convert from temperature to radiance units and vice versa. This method has been found to yield arc tube surface temperatures with relatively high accuracy.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jagannathan Ravi and Robert P. Madding "Nondestructive method of high-intensity discharge lamp temperature measurement", Proc. SPIE 4020, Thermosense XXII, (30 March 2000); https://doi.org/10.1117/12.381561
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lamps

Glasses

Temperature metrology

Optical filters

Thermography

Calibration

Nondestructive evaluation

Back to Top