Paper
30 December 1999 Analysis of photomask CD errors depending on development methods
Author Affiliations +
Abstract
As optical lithography will be extended to device generations below 150 nm of design rule, the critical dimension (CD) uniformity on a photomask is required to be as small as 13 nm (3(sigma) ). The relationship between development method and dark erosion is discussed in view of CD variations. The temperature variation on a photomask is found to be more than 4 degrees Celsius for a conventional spin-spray development. An optimized process using a 'puddle process' to minimize developer temperature effect and non-uniform spray pressure effect on CD variation. The CD uniformity using the optimized process brings 11 nm in 3(sigma) over 127 mm X 127 mm area on a 6-inch mask.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seong-Yong Moon, Won-Tai Ki, Byung-Cheol Cha, Seong-Woon Choi, Hee-Sun Yoon, and Jung-Min Sohn "Analysis of photomask CD errors depending on development methods", Proc. SPIE 3873, 19th Annual Symposium on Photomask Technology, (30 December 1999); https://doi.org/10.1117/12.373352
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Photomasks

Error analysis

Liquids

Optical lithography

Coating

Electronics

Back to Top