Paper
27 August 1999 Temperature-compensated plastic lens for visible light
Author Affiliations +
Abstract
In many consumer and professional plastic lenses have potential applications because of cost, weight and aspherical shape. However they suffer from a big disadvantage: large amount of focal shift as function of temperature. In particular for bar code scanners, focal shifts due to temperature changes have huge impacts on the function of the scanner. One possibility to improve the temperature behavior of such lenses is to turn them into so- called hybrids: a combination of a refractive and a diffractive surface. This way a temperature compensation can be achieved that reaches the level of glass lenses. In this paper design and manufacturing considerations for such a lens will be given. This includes proper material choice and mechanical design. The lens is temperature compensated over a range from -230 degrees-+60 degrees C. Operating at 650 nm and having a focal length of 4 mm, makes it extra difficult to produce such a lens with sufficient image quality and diffraction efficiency. Results from the design will be compared with measured values from an injection molded sample of the designed lens. Quality parameter such as wavefront quality, focal shift with temperature and diffraction efficiency will be given.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stefan M. B. Baumer, Wim A. G. Timmers, Mark Krichever, and Vladimir Gurevich "Temperature-compensated plastic lens for visible light", Proc. SPIE 3737, Design and Engineering of Optical Systems II, (27 August 1999); https://doi.org/10.1117/12.360028
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction

Temperature metrology

Lens design

Manufacturing

Scanners

Semiconductor lasers

Glasses

RELATED CONTENT

Uniform and efficient illumination with saddle lenses
Proceedings of SPIE (December 17 2014)
Aspheric design for manufacturability
Proceedings of SPIE (May 14 2007)
Design, Performance, And Selection Of Kodak's "EKTRAMAX" Lens
Proceedings of SPIE (November 29 1979)
New projection lens system for KrF exposure scanning tool
Proceedings of SPIE (September 14 2001)
MTF optimization in intraocular lens (IOL) design
Proceedings of SPIE (May 26 1994)

Back to Top