Paper
25 June 1999 X-ray lithography: a system integration effort
Robert A. Selzer, John Heaton, Yuli Vladimirsky, Klaus Simon
Author Affiliations +
Abstract
Despite growing expectations of significant progress in projection lithography using shorter wavelengths, x-ray lithography is still the most developed and production ready technology compared with the other NGL approaches. For the timely introduction of this technology into the manufacturing environment the development of fully integrated x-ray lithography systems becomes very important. Reflecting manufacturing and R and D demands, the x-ray technology integration has been pursued for goth synchrotron radiation and x-ray point source based approaches. While the synchrotron-based approach provides the high volume platform, the point source will provide the platform for low volume production and R and D efforts. SAL recognizes the needs for both, a synchrotron based stepper as well as a point source stepper and is focused on meeting those needs. This paper will present the status of integration efforts at SAL utilizing a point source system.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert A. Selzer, John Heaton, Yuli Vladimirsky, and Klaus Simon "X-ray lithography: a system integration effort", Proc. SPIE 3676, Emerging Lithographic Technologies III, (25 June 1999); https://doi.org/10.1117/12.351164
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-ray lithography

X-rays

System integration

Semiconducting wafers

Manufacturing

Photomasks

X-ray sources

RELATED CONTENT

Trends In X-Ray Lithography
Proceedings of SPIE (June 30 1982)
Vacuum spark point source for x-ray/EUV lithography
Proceedings of SPIE (August 20 2001)
Pulsed Plasma Source For X-Ray Lithography
Proceedings of SPIE (July 28 1981)
Review of x-ray collimators for x-ray proximity lithography
Proceedings of SPIE (November 23 1999)
Comparison Of Different X Ray Sources X Ray Tubes,...
Proceedings of SPIE (March 19 1984)
Recent developments of x-ray lithography in Canada
Proceedings of SPIE (August 01 1991)
Cost of ownership for x-ray proximity lithography
Proceedings of SPIE (May 13 1994)

Back to Top