Paper
7 April 1999 Combining optical and thermal stresses in multiple-shot laser experiments
Guillaume Ravel, Jean Dijon, Philippe Lyan, Oliver Lartigue
Author Affiliations +
Abstract
We report surface damage measurements on single crystal silicon under single and multiple 3 ns pulse laser irradiation at 1.06 micrometers wavelength. First, single shot damage threshold is measured. Then the numbers of pulses required to damage with a probability of 0.5 at various fluences below this 1/1 threshold are obtained at room temperature. These results are fitted with various life models. We look at temperature as a means to accelerate life test. A new feature of the laser test facility in our laboratory is described, allowing surface damage measurements under controlled thermal environment, with testing temperatures ranging from room temperature to 180 Celsius degrees. Experimental demonstration of accelerated failure time for silicon at 1.06 micrometers is provided.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guillaume Ravel, Jean Dijon, Philippe Lyan, and Oliver Lartigue "Combining optical and thermal stresses in multiple-shot laser experiments", Proc. SPIE 3578, Laser-Induced Damage in Optical Materials: 1998, (7 April 1999); https://doi.org/10.1117/12.344396
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Laser induced damage

Semiconductor lasers

Temperature metrology

Data modeling

Laser damage threshold

Pulsed laser operation

Back to Top