Nucleation and growth control in pulsed laser epitaxy of oxide thin films

Hideomi Koinuma; Masashi Kawasaki; Satoru Ohashi; Mikk Lippmaa; Naoyuki Nakagawa; Masashi Iwasaki; X. G. Qiu

doi:10.1117/12.335892

22 December 1998 Nucleation and growth control in pulsed laser epitaxy of oxide thin films

Hideomi Koinuma, Masashi Kawasaki, Satoru Ohashi, Mikk Lippmaa, Naoyuki Nakagawa, Masashi Iwasaki, X. G. Qiu

Proceedings Volume 3481, Superconducting and Related Oxides: Physics and Nanoengineering III; (1998) https://doi.org/10.1117/12.335892
Event: SPIE's International Symposium on Optical Science, Engineering, and Instrumentation, 1998, San Diego, CA, United States

Abstract

Due to the non-steady state nature of film growth by laser MBE, as well as by the conventional pulsed laser deposition (PLD), we could find an advantage of the method for controlling the film growth. The independent optimization of nucleation and growth processes is possible by pulse sequence and laser energy density. Another critical factor for controlling the growth mode was revealed to exist in the surface state of the substrate as the stating point of film growth. We have developed a wet etching method for automatically finishing SrTiO₃ substrate surface to facilitate the layer by layer growth of high Tc and other oxide thin films. The sequential deposition of SrO and BaO monolayers on the treated SrTiO₃ substrate greatly reduced the nucleation of precipitates in the YBa₂Cu₃O₇ (YBCO) thin films. Thus, PLD growth of YBCO thin film could be controlled on an atomic scale. Temperature gradient deposition achieved the orientational control of YBCO thin films on (100) and (110) SrTiO₃ substrates. Laser MBE successfully produced high quality epitaxial oxide films by 2-dimensional layer by layer manner as well as by step-flow mode, as verified by the sharp RHEED intensity oscillation. This dimension control epitaxy enabled us to fabricate oxide superlattices and quantum wires. With the substrate treatment and buffer layer techniques, together with suitable choice of insulating layer material, we have verified the fabrication of superconducting-insulating-superconducting trilayer which is the prototype for tunneling junctions. A possibility of using (110) oriented YBCO thin films for Josephson THz laser is also discussed.

Citation Download Citation

Hideomi Koinuma, Masashi Kawasaki, Satoru Ohashi, Mikk Lippmaa, Naoyuki Nakagawa, Masashi Iwasaki, and X. G. Qiu "Nucleation and growth control in pulsed laser epitaxy of oxide thin films", Proc. SPIE 3481, Superconducting and Related Oxides: Physics and Nanoengineering III, (22 December 1998); https://doi.org/10.1117/12.335892

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available