Paper
10 November 1998 AIRWATCH: the collection optics
David J. Lamb, Russell A. Chipman, John O. Dimmock, Lloyd W. Hillman, Yoshiyuki Takahashi
Author Affiliations +
Abstract
The Airwatch optical system is shown to have minimal resolution requirements while requiring both a large entrance aperture and a simple configuration. Several single and double element optical systems are discussed, and Fresnel lenses are shown to be a promising candidate for the Airwatch optical system. Design techniques of Fresnel lens systems are presented, and it is shown how complex Fresnel lenses systems can be modeled and analyzed using commercially available ray tracing programs. It is then demonstrated how the performance of the single element system can be improved through the use of a two element configuration. Specifically, focal surface curvature can be eliminated, and the FOV of a single aperture can be increased by switching to the two element design. Techniques for reducing the size of the focal surface are also discussed. Finally, current research efforts involving the construction of prototype Fresnel lens system are explained.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David J. Lamb, Russell A. Chipman, John O. Dimmock, Lloyd W. Hillman, and Yoshiyuki Takahashi "AIRWATCH: the collection optics", Proc. SPIE 3445, EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy IX, (10 November 1998); https://doi.org/10.1117/12.330310
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fresnel lenses

Mirrors

Prototyping

Imaging systems

Systems modeling

Manufacturing

Lens design

RELATED CONTENT

Use Of A Cartesian Oval Fibre Optic 'Lens' As A...
Proceedings of SPIE (February 14 1986)
Optical Systems With Off-Axis Mirrors
Proceedings of SPIE (June 10 1987)
Optimizing an active extreme asphere based optical system
Proceedings of SPIE (December 18 2012)
Image slicers: design for manufacturability
Proceedings of SPIE (September 24 2004)

Back to Top