Paper
23 September 1998 Induced absorption in silica: a preliminary model
Author Affiliations +
Abstract
The use of silica lenses in a photolithographic system employing a 193 nm excimer laser has been proposed. It is desirable to determine if, at the low intensity to be used in the system (approximately equals 0.1 mJ/cm2), the glass will withstand about ten years of use without objectionable induced absorption. At a pulse frequency of 1 Khz, this length of time corresponds to about 1011 pulses. Because of the long time involved, an accelerated test is needed to determine the susceptibility of silica to induced absorption. The mechanism of darkening must be understood in order that the behavior of the glass under use conditions be predicted with confidence from the results of the accelerated test. The most important processes in the mechanism of induced absorption are: (1) Two photon absorption creating an exciton; (2) Trapping of the exciton by a localized state; (3) Dissociation of the trapped exciton to form an E' center and a NBOHC; (4) Reaction of these centers with hydrogen to form SiH and SiOH bonds; and (5) Photolysis of the SiH bonds to produce more E' centers. The mechanism will be discussed in detail and the agreement with experimental results over a range of intensities and hydrogen levels will be presented.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Roger J. Araujo, Nicholas F. Borrelli, and Charlene M. Smith "Induced absorption in silica: a preliminary model", Proc. SPIE 3424, Inorganic Optical Materials, (23 September 1998); https://doi.org/10.1117/12.323748
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Hydrogen

Absorption

Glasses

Excitons

Silica

Electroluminescence

Photolysis

Back to Top