Paper
14 July 1998 Emission and emittance measurements of electron beams generated from metal and diamond photocathodes
Anatoli A. Beloglazov, Vincenzo Nassisi, Vitali I. Konov, Sergej M. Pimenov, A. Raino, V. Stagno
Author Affiliations +
Proceedings Volume 3423, Second GR-I International Conference on New Laser Technologies and Applications; (1998) https://doi.org/10.1117/12.316614
Event: Second GR-I International Conference on New Laser Technologies and Applications, 1997, Olympia, Greece
Abstract
In this work the electron beam current and beam emittance measured for an Al and a diamond film cathode irradiated with two different UV excimer lasers, XeCl and KrCl, are presented. The output current was measured with a fast Rogowski coil while the emittance was determined with a new diagnostic setup composed by two movable slit arrays and an array of small cups. The phase space area occupied by the electrons at the output was determined by the current measured with the cups and by the position of the slits. With a 4 mm2 beam spot the maximum current from an Al cathode was 740 mA and from a diamond cathode was 560 mA with the KrCl laser. The corresponding emittance values were 130 and 50 for the Al and the diamond cathode, respectively. From these values the normalized beam brightness were estimated to be 0.18 X 109 A((pi) m rad)-2 for Al cathode and 0.92 X 109 A((pi) mrad)-2 for diamond cathode.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anatoli A. Beloglazov, Vincenzo Nassisi, Vitali I. Konov, Sergej M. Pimenov, A. Raino, and V. Stagno "Emission and emittance measurements of electron beams generated from metal and diamond photocathodes", Proc. SPIE 3423, Second GR-I International Conference on New Laser Technologies and Applications, (14 July 1998); https://doi.org/10.1117/12.316614
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diamond

Aluminum

Electron beams

Excimer lasers

Metals

Optical testing

Plasma

RELATED CONTENT

Influence of shielded gas flow in CO2 laser welding of...
Proceedings of SPIE (January 13 2005)
Effect of pulse number on the ablation rate of metals...
Proceedings of SPIE (December 03 2010)
UV-laser-produced plasma in gases and on metal targets
Proceedings of SPIE (May 29 2001)
Surface treatment of metallic alloys by ultraviolet laser
Proceedings of SPIE (March 29 1996)
Long-life 2kHz x-ray preioniser
Proceedings of SPIE (August 16 1994)

Back to Top