Overlay target design characterization and optimization for tungsten CMP

Stephen Hsu; Mircea V. Dusa; Joost Vlassak; Cameron Harker; Michelle L. Zimmerman

doi:10.1117/12.308744

8 June 1998 Overlay target design characterization and optimization for tungsten CMP

Stephen Hsu, Mircea V. Dusa, Joost Vlassak, Cameron Harker, Michelle L. Zimmerman

Proceedings Volume 3332, Metrology, Inspection, and Process Control for Microlithography XII; (1998) https://doi.org/10.1117/12.308744
Event: 23rd Annual International Symposium on Microlithography, 1998, Santa Clara, CA, United States

Abstract

As the semiconductor industry pushes design rules to 0.25 micron and below, tungsten chemical mechanical polishing (WCMP) is emerging as a key process that reduces defect density, increases circuit density and improves yield. However, due to the non-selective nature of the WCMP process, the stepper alignment marks and the overlay metrology target can be seriously damaged during the polishing process. The result of this damage may contribute to the total misregistration error. This paper describes a systematic overlay target optimization on various WCMP layers in order to evaluate and reduce target and measurement noise. Eight different target designs were evaluated on three different metal layers. The quantification of overall measurement counts, measurement precision, modeled residual, and kernel analysis was used as the metric for determining the overall effectiveness of each overlay target design. Short and long term gauge studies were performed to verify the measurement capability of the metrology tool. An experiment was performed in which a known offset was introduced on the stepper to confirm that the overlay measurement responded accordingly. To verify the robustness of the target, oxide thickness, tungsten thickness and polish time were varied on one of the three layers. The measured overlay error was also correlated to cross-section scanning electron microscope (SEM) results.

Citation Download Citation

Stephen Hsu, Mircea V. Dusa, Joost Vlassak, Cameron Harker, and Michelle L. Zimmerman "Overlay target design characterization and optimization for tungsten CMP", Proc. SPIE 3332, Metrology, Inspection, and Process Control for Microlithography XII, (8 June 1998); https://doi.org/10.1117/12.308744

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available