Paper
6 March 1998 3D range optical sensor: analysis of the measurement errors and development of procedures for their compensation
Matteo Carocci, Sara Lazzari, Roberto Rodella, Giovanna Sansoni
Author Affiliations +
Proceedings Volume 3313, Three-Dimensional Image Capture and Applications; (1998) https://doi.org/10.1117/12.302452
Event: Photonics West '98 Electronic Imaging, 1998, San Jose, CA, United States
Abstract
In this paper, the analysis of the measurement errors in an optical sensor for the achievement of 3D range images is presented together with the procedures developed for their compensation. The optical sensor performs the 3D measurement by means of the active stereo vision approach in which the correspondence problem is solved by means of the projection of structured light, basically consisting of patterns of fringes with rectangular profile. Two measurement errors have been identified: the former, thereafter called 'waviness,' is intrinsic to the rectangular profile of the fringes. This error has been dramatically reduced by means of a filtering block, based on a cascade of two Butterworth low-pass IIR filters. The latter, thereafter called 'slope,' is due to the crossed axes optical geometry of the system, which results into a stripe broadening of the projected fringes. The compensation of this error has been achieved by taking into account the orientation of the optical devices of the system and by mapping light directions into measurement coordinates. In this paper, the main features of the procedures developed to minimize these errors are presented and some interesting experimental results are shown.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matteo Carocci, Sara Lazzari, Roberto Rodella, and Giovanna Sansoni "3D range optical sensor: analysis of the measurement errors and development of procedures for their compensation", Proc. SPIE 3313, Three-Dimensional Image Capture and Applications, (6 March 1998); https://doi.org/10.1117/12.302452
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D metrology

Error analysis

Projection systems

Optical sensors

Linear filtering

Cameras

Video

Back to Top