Paper
3 October 1997 Single-pulse high-power microwave detector
Xiaolong Liu, Guozhi Liu, Zhengfu Li, Shi Qiu
Author Affiliations +
Abstract
A single-pulse high power microwave detector was described in this paper, which was developed based on hot carriers effect in P-type semiconductors for measuring the power of high power microwave. The detector consists of P-type silicon as sensor unit and standard wave guide and is characterized by its capability of undertaking much higher power of microwave (about 6 orders higher than ordinary crystal detectors), fast response (response time is less than 1.7 ns), good linearity and large amplitude of output pulse, and can offer 3.0 GHz to 20 GHz performance with various waveguide. Also included in this paper are the calibration procedure of the detectors and results. The detector can be proved to be an efficient technical approach to solve the problems in measurements of high power microwaves.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaolong Liu, Guozhi Liu, Zhengfu Li, and Shi Qiu "Single-pulse high-power microwave detector", Proc. SPIE 3158, Intense Microwave Pulses V, (3 October 1997); https://doi.org/10.1117/12.284017
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Microwave radiation

Waveguides

High power microwaves

Calibration

Crystals

Diodes

Back to Top