Spiral CT: medical use and potential industrial applications

Willi A. Kalender; Klaus Engelke; Stefan Schaller

doi:10.1117/12.279357

24 October 1997 Spiral CT: medical use and potential industrial applications

Willi A. Kalender, Klaus Engelke, Stefan Schaller

Proceedings Volume 3149, Developments in X-Ray Tomography; (1997) https://doi.org/10.1117/12.279357
Event: Optical Science, Engineering and Instrumentation '97, 1997, San Diego, CA, United States

Abstract

Demands on image quality in general and on low-contrast resolution in particular ware very high for medical uses of x-ray computed tomography (CT). Therefore in conventional single-slice CT, perfect planar geometry was strictly adhered to where consistent data over 360 degrees can be acquired. This implied scanning the object slice by slice. Fast volume imaging had been a request in medical imaging for a long time, but results of various approaches like cone-beam CT remained unsatisfactory. Spiral CT, the first non-planar scan mode which gained general acceptance, was first introduced in 1989, 3D volume imaging of 3 to 100 cm body sections within 10 to 60 s by spiral CT is now routine in medical imaging. We will review the spiral scan principle and the different approaches to image reconstruction which are presently implemented. In particular, the type of z- interpolation algorithm can be used to include noise, z-axis resolution and artifact behavior. Aspects of image quality are discussed in detail. There are only subtle differences between conventional single slice CT and spiral volume scanning. Thereby the old paradigm that high quality CT scanning demands perfect planar geometry has become obsolete. The medical use of spiral CT is meanwhile undisputed; but a review of typical applications indicates then need for further improvements in the speed of volume data acquisition, in particular the need for more efficient use of the available x-ray power. This shall lead to new approaches like the combined use of spiral CT and multi-row detectors and cone angle CT based on area detectors. We review respective efforts and their implications for potential industrial applications.

Citation Download Citation

Willi A. Kalender, Klaus Engelke, and Stefan Schaller "Spiral CT: medical use and potential industrial applications", Proc. SPIE 3149, Developments in X-Ray Tomography, (24 October 1997); https://doi.org/10.1117/12.279357

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available