Paper
1 November 1997 Rapid fabrication and characterization of sine wave targets
Robert D. Day, Elfino Armijo, Peter Gobby, Douglas Hatch, Gerald Rivera, Leander Salzer, John Townsend
Author Affiliations +
Abstract
The effect of surface perturbations on Inertial Confinement Fusion target performance is currently being researched at Los Alamos National Laboratory. These perturbations can cause hydrodynamic instabilities which in turn reduce the targets' yield. To systematically measure the growth of these instabilities requires targets to be produced which have perturbations of a known amplitude and spatial frequency. We have recently assembled hardware onto one of our diamond turning lathes which enables us to machine and measure these sine waves in about 15 minutes. This is a significant reduction in time from the two and one half hours required by the previous method. This paper discuses the hardware, how it works, and how well the system is working for us to produce these targets.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert D. Day, Elfino Armijo, Peter Gobby, Douglas Hatch, Gerald Rivera, Leander Salzer, and John Townsend "Rapid fabrication and characterization of sine wave targets", Proc. SPIE 3134, Optical Manufacturing and Testing II, (1 November 1997); https://doi.org/10.1117/12.279128
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spindles

Fourier transforms

Capacitance

Content addressable memory

Amplifiers

Analog electronics

Manufacturing

RELATED CONTENT

Simulation of MSF errors using Fourier transform
Proceedings of SPIE (August 07 2018)
Dynamic Testing Of Optical Disk Profile
Proceedings of SPIE (January 01 1983)
Piezoelectric Translators With Submicron Accuracy
Proceedings of SPIE (January 02 1986)
Aspheric Optical Manufacturing
Proceedings of SPIE (October 27 1978)
Direct Machining Of A Non-Axisymmetric Phase Corrector
Proceedings of SPIE (January 29 1989)

Back to Top