Paper
24 September 1996 Fiber optic intrusion sensor
Jaehee Park, Henry Fuller Taylor
Author Affiliations +
Proceedings Volume 2895, Fiber Optic Sensors V; (1996) https://doi.org/10.1117/12.252125
Event: Photonics China '96, 1996, Beijing, China
Abstract
The feasibility of producing a practical buried fiber optic sensor with high sensitivity for detecting intruders is demonstrated. Experiments were carried out on such an all fiber Michelson interferometer in which the sensing arm was buried in sand. When a 42 inch sensing arm was buried 8 inches deep in sand, the weight required for a half fringe shift in the sensor output was 22 pounds and the sensitivity was about 10 degrees/pound. The relation between the applied pressure and the phase change was linear. Experimental results indicated that the sensitivity of an optical fiber sensor was sufficient to detect people on foot and vehicles passing over the buried fiber.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jaehee Park and Henry Fuller Taylor "Fiber optic intrusion sensor", Proc. SPIE 2895, Fiber Optic Sensors V, (24 September 1996); https://doi.org/10.1117/12.252125
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber optics sensors

Fiber optics

Michelson interferometers

Modulation

Phase shifts

Mirrors

RELATED CONTENT

A fiber-optic flexural disk microphone of high sensitivity
Proceedings of SPIE (December 13 2012)
Advances In Fiber Optic Based Acoustic Sensors
Proceedings of SPIE (October 15 1982)
Miniature fiber optic loop for compact optical sensors
Proceedings of SPIE (February 03 1999)
Mosaic Optical Fibers
Proceedings of SPIE (January 30 1990)

Back to Top