Paper
13 September 1996 Material property measurements of micromechanical polysilicon beams
Raj K. Gupta, Peter M. Osterberg, Stephen D. Senturia
Author Affiliations +
Proceedings Volume 2880, Microlithography and Metrology in Micromachining II; (1996) https://doi.org/10.1117/12.250952
Event: Micromachining and Microfabrication '96, 1996, Austin, TX, United States
Abstract
Fabrication- and measurement-induced stresses in surface micromachined structures are investigated by wafer-level probing of electrostatically actuated polysilicon test structures fabricated by the MUMPs process of MCNC. The test structures are based on M-Test, an electrostatic pull-in approach for monitoring process uniformity and reproducibility, and, when used in conjunction with suitable geometric data, for measuring material properties. The sensitivity of the pull-in technique reveals that the simple step of placing the die on a vacuum probe station can significantly affect the measured results. The presence of strain gradients in the polysilicon and compliant structural supports for the beams makes the modeling more complex than for ideal geometries, but with appropriate adjustments to the models, and with knowledge of the strain gradient obtained from cantilever tip deflection as a function of beam length, the technique enables a measurement of the elastic modulus and the fabrication-induced residual stress.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Raj K. Gupta, Peter M. Osterberg, and Stephen D. Senturia "Material property measurements of micromechanical polysilicon beams", Proc. SPIE 2880, Microlithography and Metrology in Micromachining II, (13 September 1996); https://doi.org/10.1117/12.250952
Lens.org Logo
CITATIONS
Cited by 25 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Data modeling

Modeling

Microelectromechanical systems

Oxides

Diamond

Fabrication

Metrology

RELATED CONTENT

Cutting edge CMP modeling for front end of line (FEOL)...
Proceedings of SPIE (March 28 2017)
Microfluidics-related research and applications
Proceedings of SPIE (September 10 2002)
Micro-shutter developments for IR applications
Proceedings of SPIE (August 19 2008)
Electrothermal modeling of silicon PCR chips
Proceedings of SPIE (April 30 2001)

Back to Top