Paper
23 September 1996 Simple technology for fabricating micromechanical 3D structures using electroplating without photoresist mold
Author Affiliations +
Proceedings Volume 2879, Micromachining and Microfabrication Process Technology II; (1996) https://doi.org/10.1117/12.251207
Event: Micromachining and Microfabrication '96, 1996, Austin, TX, United States
Abstract
In this work, we have developed a simple method to fabricate 3D microstructures which eliminates the use of photoresist as molding material. Our method of pattern transfer exploits the anisotropic etch of silicon using EDP or TMAH which allows fabrication of unique structures that would have not been possible by the photoresist-mold method. In this technology the etched silicon substrate itself is used as the mold for subsequent electroplating process to deposit metallic material such as gold, nickel, or iron-nickel alloy. These electroplated microstructures can be easily removed from the silicon mold by choosing an appropriate seed layer which gives poor adhesion to silicon or silicon dioxide substrate. Using this technology metallic microstructures with thicknesses of 300 micrometers has been fabricated to demonstrate the feasibility. We have also fabricated a sharp tip, pyramidal structures suitable for ionization detectors in an integrated micromachined gas chromatographic system.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bahram Ghodsian, M. Parameswaran, and Marek Syrzycki "Simple technology for fabricating micromechanical 3D structures using electroplating without photoresist mold", Proc. SPIE 2879, Micromachining and Microfabrication Process Technology II, (23 September 1996); https://doi.org/10.1117/12.251207
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Etching

Semiconducting wafers

Electroplating

Gold

Sensors

Anisotropic etching

RELATED CONTENT

Bolometric detectors for the Planck Surveyor
Proceedings of SPIE (February 17 2003)
X-ray mask fabrication process
Proceedings of SPIE (July 03 1995)
Electroplated nickel mold insert for LIGA
Proceedings of SPIE (September 19 1995)
Large diameter dual axis MEMS based mirror for laser beam...
Proceedings of SPIE (February 14 2011)

Back to Top