Paper
6 June 1995 SSPM-based high-speed infrared photometer for astronomy
Stephen S. Eikenberry, Giovanni G. Fazio, Scott M. Ransom
Author Affiliations +
Abstract
We describe the design, operation, and performance of a new high-speed infrared photometer using the solid-state photomultiplier (SSPM) detector. The SSPM was developed by Rockwell International Science Center and has single-photon counting capability over the 0.4 - 28 micron wavelength range, intrinsic time response of order 1 ns, and low detector noise (Petroff, et al., 1987). We have operated a 200 X 200-micron back-illuminated SSPM in a liquid-helium cooled dewar with a room-temperature transimpedance amplifier output. Single photon pulses can be easily distinguished above the amplifier noise. The individual photon pulses are binned at a selectable time resolution ranging from 5 microsecond(s) to 64 ms, and then written to Exabyte tape. In the first astronomical application of such a device, we have made observations of the Crab Nebula pulsar and Her X-1 at near-infrared wavelengths (J-, H- , and K-bands), and we present the instrument sensitivities established by these observations. We discuss other astronomical observations which are either planned or currently underway. Finally, we present design specifications and predicted performances for a second-generation SSPM high-speed infrared photometer.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephen S. Eikenberry, Giovanni G. Fazio, and Scott M. Ransom "SSPM-based high-speed infrared photometer for astronomy", Proc. SPIE 2475, Infrared Detectors and Instrumentation for Astronomy, (6 June 1995); https://doi.org/10.1117/12.211258
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Photometry

Infrared radiation

Telescopes

Infrared photography

Astronomy

Amplifiers

Back to Top