Paper
28 July 1994 Grating reflectors for erbium-doped lithium niobate waveguide lasers
Juergen Soechtig, Helmut Schuetz, Richard Widmer, Hans W. Lehmann, Robert Gross
Author Affiliations +
Abstract
A grating fabrication technology has been established for producing DFB- /DBR-grating structures in Er-doped Ti:LiNbO3 waveguide lasers. It is based on holographically defined resist gratings transferred into the surface of LiNbO3 waveguides using reactive ion etching with SF6 gas as the dry etching technique. For a sample with a 24 mm long surface relief grating of 346 nm period, a transmission drop of -11.7 dB, a filter bandwidth as small as 0.08 nm, a Bragg resonance wavelength at 1528.4 nm very close to the Erbium absorption line at 1531 nm and excess losses attributed to the grating of only 1 to 2 dB were measured.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Juergen Soechtig, Helmut Schuetz, Richard Widmer, Hans W. Lehmann, and Robert Gross "Grating reflectors for erbium-doped lithium niobate waveguide lasers", Proc. SPIE 2213, Nanofabrication Technologies and Device Integration, (28 July 1994); https://doi.org/10.1117/12.180951
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Erbium

Reactive ion etching

Etching

Chromium

Optical filters

Absorption

RELATED CONTENT


Back to Top