Paper
1 June 1994 Fiber feed for the SDSS spectrograph
Russell E. Owen, Walter A. Siegmund, Siriluk Limmongkol, Charles L. Hull
Author Affiliations +
Abstract
A 640 fiber feed for a pair of moderate resolution spectrographs is being constructed for the sloan digital sky survey. The spectrograph slits, optical fibers and plug-plates are mounted together in removable cartridges. The cartridges protect the optical fibers and provide quick-change interfaces to the telescope and the spectrographs. Ten cartridges will be made to allow plugging to occur during the day. The fibers are constructed in harnesses of 20. These are mass-terminated in v- groove blocks at the spectrograph slit. At the input end the fibers are terminated in simple ferrules and manually plugged into aluminum plug-plates. The plug-plates are deformed to match the best focal surface of the telescope, and the holes are drilled to be parallel to the principal ray after bending. We describe a simple technique for drilling accurate holes.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Russell E. Owen, Walter A. Siegmund, Siriluk Limmongkol, and Charles L. Hull "Fiber feed for the SDSS spectrograph", Proc. SPIE 2198, Instrumentation in Astronomy VIII, (1 June 1994); https://doi.org/10.1117/12.176689
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spectrographs

Aluminum

Optical fibers

Telescopes

Polishing

Interfaces

Metals

RELATED CONTENT

Final design of optical fibre routing for 4MOST
Proceedings of SPIE (July 10 2018)
The impact of fiber fusion splicing on the focal ratio...
Proceedings of SPIE (January 03 2020)
FOCCoS for Subaru PFS
Proceedings of SPIE (September 24 2012)
Design and development of the fibre cable and fore optics...
Proceedings of SPIE (September 24 2011)

Back to Top