Paper
6 May 1994 Load-limiting parachute inflation control
James M. Redmond, Terry D. Hinnerichs, Gordon G. Parker
Author Affiliations +
Abstract
Excessive deceleration forces experienced during high speed deployment of parachute systems can cause damage to the payload and the canopy fabric. Conventional reefing lines offer limited relief by temporarily restricting canopy inflation and limiting the peak deceleration load. However, the open-loop control provided by existing reefing devices restrict their use to a specific set of deployment conditions. In this paper, the sensing, processing, and actuation that are characteristic of adaptive structures form the basis of three concepts for active control of parachute inflation. These active control concepts are incorporated into a computer simulation of parachute inflation. Initial investigations indicate that these concepts promise enhanced performance as compared to conventional techniques for a nominal release. Furthermore, the ability of each controller to adapt to off-nominal release conditions is examined.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James M. Redmond, Terry D. Hinnerichs, and Gordon G. Parker "Load-limiting parachute inflation control", Proc. SPIE 2190, Smart Structures and Materials 1994: Smart Structures and Intelligent Systems, (6 May 1994); https://doi.org/10.1117/12.175230
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spindles

Switches

Control systems

Fourier transforms

Modulation

Signal processing

Computer simulations

Back to Top