Paper
1 June 1994 Near-infrared InGaAs/InP distributed-feedback lasers for spectroscopic applications
Ramon U. Martinelli, Raymond J. Menna, David E. Cooper, Clinton B. Carlisle, Haris Riris
Author Affiliations +
Abstract
Near-infrared diode-laser-based systems using laser-absorption molecular spectroscopy can sensitively monitor atmospheric gases, pollutants, and toxic gases. They can also monitor trace gases on the human breath for medical diagnostics. The detection levels are equal to or less than parts per million. Sarnoff/SRI has made and tested room-temperature InGaAsP/InP DFB lasers operating at 1.39, 1.6, and 1.65 micrometers . All of these devices had output powers of 10 mW or more. The current-tuning rates varied from -580 to -1240 MHz/mA. The temperature tuning rate was about 0.1 nm/K for all devices. Continuous tuning ranges were 7 nm for the 1.39 micrometers lasers and 5 nm for the 1.6 and 1.65 micrometers lasers. We observed H2O at 1.39 micrometers , CO and CO2 at 1.6 micrometers , and CH4 at 1.65 micrometers . We monitored the ratio of 13CO2 to 12CO2 on human breath samples as the initial step towards clinical trials for medical diagnostics.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ramon U. Martinelli, Raymond J. Menna, David E. Cooper, Clinton B. Carlisle, and Haris Riris "Near-infrared InGaAs/InP distributed-feedback lasers for spectroscopic applications", Proc. SPIE 2148, Laser Diode Technology and Applications VI, (1 June 1994); https://doi.org/10.1117/12.176626
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Semiconductor lasers

Laser spectroscopy

Carbon monoxide

Diodes

Gases

Laser applications

Back to Top