Paper
4 May 1993 Modeling of high-pressure O2(1^) generators for chemical oxygen-iodine lasers
Author Affiliations +
Proceedings Volume 1810, 9th International Symposium on Gas Flow and Chemical Lasers; (1993) https://doi.org/10.1117/12.144538
Event: Ninth International Symposium on Gas Flow and Chemical Lasers, 1992, Heraklion, Greece
Abstract
A theoretical model is developed for chemical generators producing O2(1(Delta) ) at high pressure. Such generators are especially important for supersonic chemical oxygen-iodine lasers. The model treats different types of generators, e.g., bubble column, film, aerosol, and jet generators. The main factor affecting the O2(1(Delta) ) yield under high pressure is liquid-phase quenching enhanced by depletion of HO2- ions near the gas/liquid interface. Simple analytical expressions are derived for the O2(1(Delta) ) yield at the exit of the generator. Output characteristics of different specific generators are calculated and compared with available experimental results. O2(1(Delta) ) yield > 0.5 can be achieved for oxygen pressure up to 50 Torr and flowrates of 3 mmol/cm2s. For equal velocities of the gas and the liquid the maximum flux of the energy carried by O2(1(Delta) ) for jet or aerosol generators reaches 200 W/cm2. It can be increased by increasing the liquid velocity in the generator.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Boris D. Barmashenko and Salman Rosenwaks "Modeling of high-pressure O2(1^) generators for chemical oxygen-iodine lasers", Proc. SPIE 1810, 9th International Symposium on Gas Flow and Chemical Lasers, (4 May 1993); https://doi.org/10.1117/12.144538
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

Chemical lasers

Interfaces

Atmospheric modeling

Aerosols

Chemical oxygen iodine lasers

Oxygen

RELATED CONTENT

Advanced spray generator of singlet oxygen
Proceedings of SPIE (April 26 2007)
High pressure COIL problem
Proceedings of SPIE (February 13 1996)

Back to Top