Paper
1 March 1991 Three-dimensional inspection using laser-based dynamic fringe projection
David Mark Harvey, Michael Mason Shaw, Clifford Allan Hobson, Christopher M. Wood, John T. Atkinson, Michael J. Lalor
Author Affiliations +
Abstract
This paper initially describes the principles of laser-based dynamic fringe projection techniques, and more specifically, how these techniques have been exploited in the Dynamic Automated Range Transducer (DART). This instrument employs novel techniques to produce a high accuracy single point range measurement over a wide variety of distances. The latest miniature optical components lend themselves to the production of a small, low-cost, self-contained device, which is easily portable and suitable for use in on-line, automated inspection systems, or in the field. The development of the DART for three- dimensional measurements is described. Two methods are possible, either a single beam or twin-beam system. Using a CCD photodiode array with precise pixel geometry an accurate three dimensional mapping of an object can be achieved. The problems of processing the data from the various DART systems is briefly examined. For multi-pixel measurements a parallel architecture using fast digital signal processing devices is recommended.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David Mark Harvey, Michael Mason Shaw, Clifford Allan Hobson, Christopher M. Wood, John T. Atkinson, and Michael J. Lalor "Three-dimensional inspection using laser-based dynamic fringe projection", Proc. SPIE 1400, Optical Fabrication and Testing, (1 March 1991); https://doi.org/10.1117/12.26112
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D metrology

Sensors

Distance measurement

Inspection

Signal processing

Signal detection

Data processing

Back to Top