Paper
1 August 1990 Effects of high frequency injection and optical feedback on semiconductor laser performance
Edward C. Gage, Scott Beckens
Author Affiliations +
Proceedings Volume 1316, Optical Data Storage; (1990) https://doi.org/10.1117/12.22006
Event: Optical Data Storage, 1990, Vancouver, Canada
Abstract
At typical read powers, laser intensity fluctuations can be the dominant source of noise in the read channel of an optical drive. Even with the isolation present in most write-once optical heads, optical feedback (OFB) can be a significant contributor to the noise in the system read channel. The dominant laser noise sources are mode hopping and mode partition noise.' The former noise is particularly troublesome as it results from an alternation of the dominant laser mode, which causes output power fluctuations and irreproducible playback performance. At certain combinations of drive current, temperature, and optical feedback, this unstable behavior is observed. The second contributor, mode partition noise, is the broad-band noise associated with the transient variation in the partition of energy per mode.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Edward C. Gage and Scott Beckens "Effects of high frequency injection and optical feedback on semiconductor laser performance", Proc. SPIE 1316, Optical Data Storage, (1 August 1990); https://doi.org/10.1117/12.22006
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Head

Modulation

Optical storage

Phase shift keying

Sensors

Interference (communication)

Back to Top