Presentation + Paper
7 June 2024 Self Q-switched Nd, Cr:YAG transparent ceramics
Ross A. Osborne, Alexander D. Drobshoff, Nerine J. Cherepy, Raymond J. Beach, Stephen A. Payne
Author Affiliations +
Abstract
Self Q-switched Nd, Cr:YAG laser rods were produced via additive manufacturing of transparent ceramics and lased. Two identical rods were produced and air annealed at different temperatures to vary the Cr4+ concentration. The pulse width varied based on the Cr4+ concentration from 10 to 18ns. The pulse repetition rate increased with the pumping intensity, up to 4 pulses within a 200μs pumping time. The pulse energy remained nearly constant at about 8mJ, with some variation attributed to thermal lensing.
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Ross A. Osborne, Alexander D. Drobshoff, Nerine J. Cherepy, Raymond J. Beach, and Stephen A. Payne "Self Q-switched Nd, Cr:YAG transparent ceramics", Proc. SPIE 13029, Laser Technology for Defense and Security XIX, 1302905 (7 June 2024); https://doi.org/10.1117/12.3019086
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Chromium

Neodymium

Annealing

Absorption

Ceramics

Rod lasers

Q switched lasers

RELATED CONTENT

Gain and laser mode studies of diode side pumped...
Proceedings of SPIE (April 14 2000)
Q-cw array LD-pumped Nd:YAG laser
Proceedings of SPIE (September 05 2002)
Pulsed diode-pumped solid state lasers
Proceedings of SPIE (August 14 1997)

Back to Top