Paper
6 February 2024 Lithium-doped apatite-type lanthanum silicate prepared by combustion method and its properties
Qichang Wang, Zhiliang Huang
Author Affiliations +
Proceedings Volume 12979, Ninth International Conference on Energy Materials and Electrical Engineering (ICEMEE 2023); 129791A (2024) https://doi.org/10.1117/12.3015141
Event: 9th International Conference on Energy Materials and Electrical Engineering (ICEMEE 2023), 2023, Guilin, China
Abstract
To improve the conductivity of apatite-type lanthanum silicate by doping Li+, this paper prepared La10-xLixSi6O27-x (x=0, 0.1, 0.2, 0.3, 0.4) by urea-combustion method. XRD analysis showed that the doping of Li+ did not destroy the apatite structure of the sample, and the doped volume was smaller than that of the undoped; The optimal sintering temperature is determined to be 1550℃ by combining linear shrinkage, relative density and SEM topography; EIS test shows that Li doping can effectively improve the conductivity of the sample. When the doping amount x=0.2, La9.8Li0.2Si6O26.8 has the best conductivity of 4.1×10-4 S cm-1 (the test temperature is 600℃), However, the conductivity of La10Si6O27 at 600℃ is 3.22×10-4 Sꞏcm-1; the Arrhenius curve shows that the activation energy of the sample shows a downward trend with the increase of the dosage.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Qichang Wang and Zhiliang Huang "Lithium-doped apatite-type lanthanum silicate prepared by combustion method and its properties", Proc. SPIE 12979, Ninth International Conference on Energy Materials and Electrical Engineering (ICEMEE 2023), 129791A (6 February 2024); https://doi.org/10.1117/12.3015141
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lanthanum

Lithium

Electrical conductivity

Silicon

Doping

Silicates

Sintering

RELATED CONTENT


Back to Top