Electro-mechanical impedance measurements in space environment with miniaturized hardware

Funmilola Nwokocha; David Hunter; Matthew Rue; Andrei Zagrai

doi:10.1117/12.3012170

9 May 2024 Electro-mechanical impedance measurements in space environment with miniaturized hardware

Funmilola Nwokocha, David Hunter, Matthew Rue, Andrei Zagrai

Proceedings Volume 12951, Health Monitoring of Structural and Biological Systems XVIII; 129511N (2024) https://doi.org/10.1117/12.3012170
Event: SPIE Smart Structures + Nondestructive Evaluation, 2024, Long Beach, California, United States

Abstract

Ever growing number of space systems raises a question about their safety and longevity. Over time, the complex space environment influences structural materials and electronics affecting mission objectives and performance. In order to determine the effect of space environment on spacecraft’s structural condition, material properties and structural interfaces need to be assessed in space. Hence, it is suggested that active non-destructive measurements are employed to provide structural health information to the spacecraft’s operator. Electro-mechanical impedance method is a promising approach to SHM of space structures due to its use of small unobtrusive piezoelectric sensors and lightweight hardware. In laboratory settings, this method typically utilizes bulky and heavy instruments, but for mid-frequency bands, a small and lightweight impedance measurement circuit could be built. A miniaturized impedance measurement analyzer was designed and built for applications requiring very small hardware mass. The development was driven by the intention to utilize the miniaturized analyzer for SHM of space structures in orbit. The impedance analyzer was designed and built from off-the-shelf components to enable impedance measurements in lower kHz frequency band. It was used to measure the impedance of a payload structure resembling a fixed plate. The aim of this measurement was to demonstrate data acquisition and storage by the miniaturized impedance logger and to compare its performance to laboratory scale instruments. The paper further discusses the effect of space environment on structures, describes and validates an analytical model for a fixed-fixed rectangular plate and provides analysis of the potential influence of thermal variation and radiation in space on electro-mechanical impedance signature.

Conference Presentation

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Funmilola Nwokocha, David Hunter, Matthew Rue, and Andrei Zagrai "Electro-mechanical impedance measurements in space environment with miniaturized hardware", Proc. SPIE 12951, Health Monitoring of Structural and Biological Systems XVIII, 129511N (9 May 2024); https://doi.org/10.1117/12.3012170

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available