Paper
16 October 2023 Tunable narrow-linewidth monolithic master oscillator tapered power amplifier diode laser based on surface bragg gratings
Author Affiliations +
Proceedings Volume 12792, Eighteenth National Conference on Laser Technology and Optoelectronics; 127921N (2023) https://doi.org/10.1117/12.2691342
Event: Eighteenth National Conference on Laser Technology and Optoelectronics, 2023, Shanghai, China
Abstract
In this paper, the tunable narrow spectral semiconductor laser technology based on on-chip DBR gratings is investigated. The surface DBR grating structure and electro-thermal tuning structure were designed, determined key parameters of grating structural, and the problem of multi-peak suppression was studied. Developed manufacturing technology for surface DBR gratings and tunable technology based on micro-electrode heaters and applied them to tapered MOPA laser chips, achieving output laser spectral locking while maintaining the high brightness of tapered semiconductor lasers. The tapered MOPA laser has achieved a narrow spectral width of 40 pm and a side mode suppression ratio of 35 dB under a continuous-wave power of 10.3 W. At a microelectrode heater current of 0.22 A, the wavelength can be continuously tuned over a range of 4.3 nm, with a maximum spectral width not exceeding 60 pm.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yi Li, Yuwen He, Kun Zhou, Haomiao Wang, Weichuan Du, Songxin Gao, and Chun Tang "Tunable narrow-linewidth monolithic master oscillator tapered power amplifier diode laser based on surface bragg gratings", Proc. SPIE 12792, Eighteenth National Conference on Laser Technology and Optoelectronics, 127921N (16 October 2023); https://doi.org/10.1117/12.2691342
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Waveguides

Etching

Laser applications

Design and modelling

Electron beam lithography

Emission wavelengths

Back to Top