Paper
30 May 2023 Signal processing treatments for static and dynamic Brillouin distributed sensing
Author Affiliations +
Abstract
The Brillouin frequency spectrum profile is characterised by the Lorentzian or the Gaussian function, which is identical to the reflection spectrum of a fibre Bragg grating (FBG), while similarly the Brillouin frequency is linearly dependent on the amount of applied strain or the ambient temperature of the fibre. In this paper, we used the Zero-Crossing fibre Bragg grating demodulation algorithm to optimise the Brillouin frequency shift of a typical single-mode optical fibre, SMF28, in which static and dynamic strain steps are applied. We showed that the FBG demodulation algorithms could be used and improve the response from a Brillouin system even though the strain levels are below the measuring capability of the system.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Theodosiou, C. Kouzoupou, A. Ioannou, M. Komodromos, and K. Kalli "Signal processing treatments for static and dynamic Brillouin distributed sensing", Proc. SPIE 12573, Specialty Optical Fibres, 125730T (30 May 2023); https://doi.org/10.1117/12.2665050
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Demodulation

Optical fibers

Signal processing

Mathematical optimization

Sensors

Spatial resolution

Back to Top