Presentation
18 April 2023 Strain-based FEM-aided bridge health monitoring (Conference Presentation)
B. Ghahremani, A. Enshaeian, P. Rizzo
Author Affiliations +
Abstract
This article presents a physics-based structural health monitoring (SHM) approach applied to a pretensioned adjacent concrete box beams bridge to predict the deformations associated with the presence of transient loads. A detailed finite element model was generated using a commercial software to create an accurate model of the bridge. The presence of concentrated loads on the deck at different locations was simulated, and a static analysis was performed to quantify the deformations induced by the loads. Such deformations were then compared to the strains recorded by an array of wireless strain gages during a controlled truckload test performed by an independent third-party. The test consisted of twenty low-speed crossings at controlled distances from the bridge parapets using a truck with a certified load. The array was part of a SHM system that consisted of 30 wireless strain gages.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. Ghahremani, A. Enshaeian, and P. Rizzo "Strain-based FEM-aided bridge health monitoring (Conference Presentation)", Proc. SPIE 12486, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2023, 124860I (18 April 2023); https://doi.org/10.1117/12.2657452
Advertisement
Advertisement
KEYWORDS
Bridges

Structural health monitoring

Environmental monitoring

Finite element methods

Reliability

Sensors

Back to Top