Presentation + Paper
5 March 2022 Single-mode polymer waveguide for fan-in/fan-out of multicore fiber by the mosquito method
Author Affiliations +
Proceedings Volume 12007, Optical Interconnects XXII; 120070A (2022) https://doi.org/10.1117/12.2614365
Event: SPIE OPTO, 2022, San Francisco, California, United States
Abstract
In this paper, in order to apply to optical connection components such as fan-in-fan-out (FIFO) devices for multicore fibers (MCFs), we design polymer optical waveguides with circular cores satisfying the single-mode condition, which are fabricated using the Mosquito method, and experimentally demonstrate that the optimum S-shape bent core waveguide can be fabricated as designed. The Mosquito method is a technique we have developed to form circular cores in both multimode and single-mode waveguides using a commercially available microdispenser and multi-axis syringe scanning robot. We have demonstrated that single-mode waveguides fabricated by the Mosquito method can be coupled with SMF with low loss. However, in order to realize a waveguide type FIFO device for MCFs by the Mosquito method, it is necessary to maintain micron-order positioning accuracy for the cores while three dimensionally aligning multiple cores in FIFO patterns. Since the pitch between the cores on the MCF side is very narrow, the core position is likely to deviate from the design value due to the liquid monomer flow caused by needle scan. We statistically confirm the possible amount of deviation from the design position by needle scan and feed it back to the program of needle scan path for the FIFO. We successfully fabricate a four-core FIFO with a desired core pitch. It is experimentally confirmed that the insertion loss is 1.4 dB on average. From these investigations, we confirm that the Mosquito method has an ability to fabricate small and low-loss FIFO devices.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sho Yakabe and Takaaki Ishigure "Single-mode polymer waveguide for fan-in/fan-out of multicore fiber by the mosquito method", Proc. SPIE 12007, Optical Interconnects XXII, 120070A (5 March 2022); https://doi.org/10.1117/12.2614365
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Single mode fibers

Cladding

Polymers

Polymer multimode waveguides

Connectors

Optical fibers

Back to Top