Paper
15 January 1990 Optimum Fusion Splicing Condition Of Optical Fibers
A. K. Das, A. Mukhopadhyay, A. Paul, D. K. Paul
Author Affiliations +
Abstract
Performance of low-loss, high strength optical fiber splices is analyzed using a parametric model that relates losses with the critical splicing conditions such as initial misalignment; prefusion condition; pressure applied between fiber before fusing, PA ; fusing temperature, T ; and time, t. Fusion time is optimized for minimum splice loss via considerations of the forces due to PA, thermal expansion, and surface tension of the viscous melted glass in the fiber. In silica fibers, the critical conditions of splicing for a minimum t and splice loss are: PA 20 g and T 2000 to 2150 °C. Although t can be reduced further at higher T, the tensile strength of the spliced zone becomes poor. For the best initial alignment and prefusion conditions achieved in the laboratory, fusion splices show an average loss of 0.12 and 0.02 dB for 10/125 pm and 50/125 pm fibers, respectively ; and a maximum tensile strength of 0.65 kg when fused at t of the order of (1.8-3.0) sec. Fiber breaking strength can be increased fivefold, provided the spliced zone is reinforced with chemical adhesive followed by polyethylene(PE) shrinkable tube and solid packing. Prooftesting of fused fiber splices subjected to a variety of adverse conditions (extreme temperatures, humidity, and submersion) assured the long-term reliability of the reinforced splices. Performance of fusion splices thus fabricated and lifetested are discussed.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. K. Das, A. Mukhopadhyay, A. Paul, and D. K. Paul "Optimum Fusion Splicing Condition Of Optical Fibers", Proc. SPIE 1174, Fiber Optics Reliability: Benign and Adverse Environments III, (15 January 1990); https://doi.org/10.1117/12.963259
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fusion splicing

Reliability

Optical fibers

Adhesives

Structured optical fibers

Fiber coatings

Fiber optics

Back to Top